The M15 is one of the most widely installed Alfa Laval plate heat exchanger frames in industrial and marine service. Alisios supplies genuine M15 gaskets and channel plates — correct elastomer, correct pattern, correct hanging system — from European authorized distribution.
Free to quote. Payment only on confirmed order.
Authorized distributors only. Full documentation on every order.
The same supply line covers M3, M6, M10, M20, MX25, T-series and TL frames, and marine plate coolers. One RFQ can cover every PHE on the site or vessel — send the frame nameplate data and duty per unit.
Gasket elastomer must match the media and temperature; plate pattern must match the original pressing. Alisios verifies both from the frame serial and nameplate before quoting — a mixed or mismatched plate pack is a leak looking for a commissioning date.
Yes — genuine gaskets in NBR, EPDM and specialty elastomers for all M15 patterns and hanging systems, from European authorized distribution.
Yes — 316 and titanium channel plates in all M15 pressings, plus start/end plates and complete pressure-tested plate packs.
It depends on media and temperature — NBR for oils and general duty, EPDM for hot water and many chemicals. Send the duty and existing gasket marking and we confirm against manufacturer data.
Yes — M3 through MX25, T-series, TL and marine coolers. One RFQ can cover the whole site.
The frame nameplate (model and serial), plate pattern if known, gasket elastomer or media/temperature, and quantities.